Description
Introducing the JKUte kit for converting a 4-door JK into a 2-door pickup. Our kit installs much more easily than the out-of-production Mopar JK8 kit and provides a stronger result. Our kit also does not require drilling out the all of the spot welds on the stock panels and comes with everything you need.
Proudly Made In The U.S.A
The factory overhead sound bar requires modification to install the hardtop. Welding and body work required with this kit.
The bed length is 50 inches and the width between wheel wells is 44 inches.
The kit includes the following parts:
Fiberglass half-cab (1 ea)
Rear sliding window (1 ea)
Weather strip for rear sliding window (1 ea)
Freedom top gasket (1 ea)
Right and Left Lexan side windows
Side window locking gasket (2 ea)
Steel B-Pillar cap (2 ea)
Right and Left rear door inner close-out panels
Right and Left rear door outer close-out panels
Right and Left bedrail caps
Front and rear bed floor pieces
Right, Left, Center bed floor supports
Angle iron front bed floor support (1 ea)
Bed floor drain kit
Fiberglass bulkhead panel (1 ea)
Right and Left roll bar tubes to floor
Roll Bar Horizontal tube (1 ea)
Right and Left roll bar floor plates
Hardware kit
View the complete installation document HERE
NOTE: The hardtop does require the use of factory freedom panels. Freedom panels are NOT included in the kit and can be ordered separately. The kit CAN be used with several different steel aftermarket full corner guards that go all the way to the door openings. These instructions and pictures in the document show welding the door closeout panels to the actual steel corners but they are NOT included. The door closeout panels can just be welded into the factory fenders and sheet metal.
FREIGHT/SHIPPING:
When selecting this item in your shopping cart, you MUST select “truck freight” shipping for the correct shipping amount to be calculated. If this is not selected, your order will be revised and emailed back to you for correct total amount approval before charge and shipment is sent.
This item is oversized and shipped by one of our preferred LTL truck freight carriers. Business address delivery is preferred but not required. Residential Delivery available for additional $75 charge. Customers may also pickup at nearest local LTL Carrier that we use.
AVAILABILITY:
This kit/product is in process of being retired because of low demand. The top and bulkhead is still available but sheet metal and cage pieces are not available.
ONSITE INSTALLATION:
GR8TOPS performs full installations in our shop in Lexington, SC. We also have a spray on bedliner system to completely seal and protect the rear (or the full interior) of your Jeep as a part of the installation of your GR8TOPS JK Recruit half hardtop kit. Please see our Installation page for more details and approximate pricing. Installations are by appointment only and normally can be completed in 1-2 business days depending on the options requested.
