803-443-6288
info@gr8tops.com
CJB08-OEM-BB
CJB08-OEM-BB
CJB08-OEM-BBCJB08-OEM-BB

OEM CJ8 Replacement Bulkhead

0 Reviews

CJ-8 Scramblers sold with half hardtops came equipped with a removable metal bulkhead divider that formed the front of the bed. These stock bulkheads were very prone to rusting on the thin lower mounting flange. In addition, because they were fairly thin pieces of stamped sheet metal, they were prone to denting when cargo in the bed slid forward. This rare Scrambler-specific part is no longer available from Jeep and nearly impossible to locate on the used market in any condition, much less new.

$295.00

Clear selection

Product Description

CJ-8 Scramblers sold with half hardtops came equipped with a removable metal bulkhead divider that formed the front of the bed. These stock bulkheads were very prone to rusting on the thin lower mounting flange. In addition, because they were fairly thin pieces of stamped sheet metal, they were prone to denting when cargo in the bed slid forward. This rare Scrambler-specific part is no longer available from Jeep and nearly impossible to locate on the used market in any condition, much less new.

Looking to correct these factory flaws and recreate an integral part of the half cab look, GR8TOPS recreated this part in durable and non-corrosive fiberglass for use with your factory CJ-8 half hardtop. The GR8TOPS bulkhead fits just like the original and only requires that you pre-drill the holes before mounting. This bulkhead can also be used on CJ7s and YJs when using a OEM CJ-8 half hardtop.

GR8TOPS recommends using foam and/or silicone sealant if you wish to semi-permanently mount the bulkhead into place for weather resistance. If you wish to permanently mount the bulkhead into place, we recommend using a urethane-based body seam sealer to seal the bulkhead into place before spraying bedliner or repainting your CJ-8.

This OEM bulkhead will probably NOT fit most fiberglass bodies or the Aqualu aluminum bodies as the inside of the both replacement bodies are a bit different than factory bodies. Aqualu does sell a specific bulkhead that will work with their aluminum CJ7 and CJ8 bodies.
The pictures shown have the pictures are with the standard black texture. The bulkheads can be shipped in a bare sanded primer format which is recommended if you are painting it to body color match your Scrambler or if you are planning on having the bed of the Jeep and bulkhead sprayed with bedliner. Otherwise the texture would need to be either sanded off to paint or scuffed for bedliner preparation.

SHIPPING:

This item is shipped via FEDEX Ground. Orders may be picked up at our location but will incur the local 7% South Carolina Sales tax. Orders shipped to a South Carolina address will also incur a 7% sales tax. Approximate shipping ranges from $15-$40 depending on your location.   Add the item to your cart and use the “calculate shipping” link to see what your actual shipping charges will be.

AVAILABILITY:

Standard orders of black bulkheads and sanded primer bulkheads normally ship within 2-4 business days.

ONSITE INSTALLATION:

GR8TOPS® can perform full installations and conversions in our shop in Lexington, SC. We also have our own spray on bedliner system to completely seal and protect the rear (or the full interior) of your Jeep after we install your GR8TOPS bulkhead. Please see installation page for more details and approximate pricing. Installations are by appointment only and normally can be completed in 1-2 business days depending on the options requested.

Additional Information

Weight 17 lbs
Dimensions 53 x 20 x 15 in
bulkhead exterior

smooth sanded primer, textured black gelcoat

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Please call for accurate shipping on truck freight items.